Steel deck STANDARD “O” 109×32

Double transoms are suitable for transferring large loads and allow to construct platforms with a spacing of stands from 1,57 m to 3,07 m.

Double transoms allow for the assembly of the following decks:

– models 157 – 4 steel decks with a width of 0,32 m and 1 with a width of  0,19 m;

– models 207 – 6 steel decks with a width of 0,32 m;

– models 257 – 7 steel decks with a width of 0,32 m and 1 with a width 0,19 m;

– models 307 – 9 steel decks with a width of 0,32 m.

Each two decks with a width of 0,32 m can be replaced by a single circulation deck with a width of  0,61 m.

The base plate comprises:

• • sole plate, which distributes the load from standard over a greater area and enablesplacement on the ground or mounting of a wheel set;

• •  threaded hollow core;

• •  flanged nut – to set the scaffolding at the required height;

• • flanged nut stopper – protection component preventing the nut from fully unscrewing.

The base plate unscrewing (loosening) distance will considerably affect the bearing capacity of the scaffolding base.

In scaffolds, the deck is one or more decking components on the same level within one bay, where the decking

component is a prefabricated or otherwise manufactured component which independently transfer loads and constitutes the deck or a deck section.

Aluminium decks come both as circulation decks (with an integrated ladder) and working decks.

They comprise a welded frame (with heads on both ends with hooks for the mounting of

frame U-profiles), reinforced by cross-bars and finished with anti-slip aluminium panel.

In the case of circulation decks, there is an additional hatch and integrated ladder.

The respective models (Standard and Heavy) differ by the type of alu section used for the deck frame ledgers and head structure.

The protective sheeting effectively shields the mortar and facade materials from excessive drying as well as from sunlight, rain, snow, and wind. It protects the scaffolding surroundings from contamination and prevents objects from falling off the scaffolding. It enables work to be carried out at low air temperatures by using heaters. Technical description: made of polyethylene, resistant to UV rays, milky-white color, temperature resistance from -40 to +80°C.