Strona główna Offer 
Scaffolding sales
SKONTAKTUJ SIĘ Z NAMI
ul. Stawowa 19
34-350 Żywiec
+48 506-347-743
+48 514-485-996
biuro@ideatrade.com.pl
We offer modular scaffolding, frame scaffolding, tower supports, and Italian scaffolding. We invite you to familiarize yourself with our products.
Double transoms are suitable for transferring large loads and allow to construct platforms with a spacing of stands from 1,57 m to 3,07 m.
Double transoms allow for the assembly of the following decks:
– models 157 – 4 steel decks with a width of 0,32 m and 1 with a width of 0,19 m;
– models 207 – 6 steel decks with a width of 0,32 m;
– models 257 – 7 steel decks with a width of 0,32 m and 1 with a width 0,19 m;
– models 307 – 9 steel decks with a width of 0,32 m.
Each two decks with a width of 0,32 m can be replaced by a single circulation deck with a width of 0,61 m.
| Weight [kg] | 20,28 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| System | UNICO X |
| Galvanization | hot-dip |
| Model | 307-O2 |
| Overall length | 3025 mm |
| Overall height | 250 mm |
| System length | 3072 mm |
| Material | steel |
Double transoms are suitable for transferring large loads and allow to construct platforms with a spacing of stands from 1,57 m to 3,07 m.
Double transoms allow for the assembly of the following decks:
– models 157 – 4 steel decks with a width of 0,32 m and 1 with a width of 0,19 m;
– models 207 – 6 steel decks with a width of 0,32 m;
– models 257 – 7 steel decks with a width of 0,32 m and 1 with a width 0,19 m;
– models 307 – 9 steel decks with a width of 0,32 m.
Each two decks with a width of 0,32 m can be replaced by a single circulation deck with a width of 0,61 m.
| Weight [kg] | 12,00 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| System | UNICO X |
| Galvanization | hot-dip |
| Model | 207-O2 |
| Overall length | 2025 mm |
| Overall height | 250 mm |
| System length | 2072 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 5,80 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 100 |
| Overall height | 1200 mm |
| System height | 1000 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 4,54 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 100 |
| Overall height | 1000 mm |
| System height | 1000 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 8,10 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 150 |
| Overall height | 1700 mm |
| System height | 1500 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 10,20 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 200 |
| Overall height | 2200 mm |
| System height | 2000 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 9,03 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 200 |
| Overall height | 2000 mm |
| System height | 2000 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 12,80 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 250 |
| Overall height | 2700 mm |
| System height | 2500 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 15,10 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 300 |
| Overall height | 3200 mm |
| System height | 3000 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 19,50 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 400 |
| Overall height | 4200 mm |
| System height | 4000 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 3,50 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 50 |
| Overall height | 700 mm |
| System height | 500 mm |
| Material | steel |
Stands are vertical structural elements transferring vertical dead load and useful load of scaffolding to the ground.
They have “rings” welded every 50 cm which allow assembly of up to eight elements (ledgers or transoms as well as braces) at the same time. They are present in some structural solutions.
Stands with spigot have a termination of the upper part in form of a spigot which allows for installing another stand. Used in constructions set on the ground (they transfer compressive loads).
| Weight [kg] | 2,30 |
|---|---|
| Unit | pcs. |
| Manufacturer | telka SA |
| Galvanization | hot-dip |
| Outside diameter | 48,3 mm |
| Model | 50 |
| Overall height | 500 mm |
| System height | 500 mm |
| Material | steel |
