The base plate comprises:

• • sole plate, which distributes the load from standard over a greater area and enablesplacement on the ground or mounting of a wheel set;

• •  threaded hollow core;

• •  flanged nut – to set the scaffolding at the required height;

• • flanged nut stopper – protection component preventing the nut from fully unscrewing.

The base plate unscrewing (loosening) distance will considerably affect the bearing capacity of the scaffolding base.

In scaffolds, the deck  is one or more decking components on the same level within one bay, where the decking component is a prefabricated or otherwise manufactured component which independently transfer loads and  constitutes the deck or deck section.

Aluminium-plywood decks come in both circulation variety (with or without an integrated ladder) and working deck variety.

They comprise a welded aluminium frame (with heads on both ends with mounting holes matching the pins on the frames), reinforced by cross-bars and finished with anti-slip

plywood. In the case of circulation decks, there is an additional hatch and integrated aluminium ladder (only for 2.57 m and 3.07 m lengths).

The respective models (Standard and Heavy) differ by the type of alu section used for the deck frame ledgers and head structure.

Double transoms are suitable for transferring large loads and allow to construct platforms with spacing of stands from 1,57 m to 3,07 m.

Double transoms allow for assembly of the following decks:

• Model 157: 4 steel decks with a width of ,32 m and 1 with a width of 0,19 m
• Model 207: 6 steel decks with a width of 0,32 m
• Model 257: 7 steel decks with a width of 0,32 m and 1 with a width of 0,19 m
• Model 307: 9 steel decks with a width of 0,32 m.

Every two platforms with a width of 0,32 m can be replaced by one circulation deck with a width of 0.61 m.

Double transoms are suitable for transferring large loads and allow to construct platforms with spacing of stands from 1,57 m to 3,07 m.

Double transoms allow for assembly of the following decks:

• Model 157: 4 steel decks with a width of ,32 m and 1 with a width of 0,19 m
• Model 207: 6 steel decks with a width of 0,32 m
• Model 257: 7 steel decks with a width of 0,32 m and 1 with a width of 0,19 m
• Model 307: 9 steel decks with a width of 0,32 m.

Every two platforms with a width of 0,32 m can be replaced by one circulation deck with a width of 0.61 m.

Double transoms are suitable for transferring large loads and allow to construct platforms with spacing of stands from 1,57 m to 3,07 m.

Double transoms allow for assembly of the following decks:

• Model 157: 4 steel decks with a width of ,32 m and 1 with a width of 0,19 m
• Model 207: 6 steel decks with a width of 0,32 m
• Model 257: 7 steel decks with a width of 0,32 m and 1 with a width of 0,19 m
• Model 307: 9 steel decks with a width of 0,32 m.

Every two platforms with a width of 0,32 m can be replaced by one circulation deck with a width of 0.61 m.

Double transoms are suitable for transferring large loads and allow to construct platforms with spacing of stands from 1,57 m to 3,07 m.

Double transoms allow for assembly of the following decks:

• Model 157: 4 steel decks with a width of ,32 m and 1 with a width of 0,19 m
• Model 207: 6 steel decks with a width of 0,32 m
• Model 257: 7 steel decks with a width of 0,32 m and 1 with a width of 0,19 m
• Model 307: 9 steel decks with a width of 0,32 m.

Every two platforms with a width of 0,32 m can be replaced by one circulation deck with a width of 0.61 m.

Transoms  are available in three structural variants:

– basic (models 42-U and 73-U and 39-O, 42-O, 73-O) – consisting of only an adequate supporting profile, terminated with heads with rigid lockers;

– reinforced –  in which directly under the supporting profile for deck assembly a special section is provided of stiffen the ledger structure;

– double – where beam allowing for the assembly of decks is reinforced with a structure consisting of a bent pipe and platens with holes.

Each variant is available with the supporting profile (for assembly of decks) in form of a special section – variant “U” or a pipe with an outer diameter of 48,3 mm – variant “O”.

Transoms 42 allows for the assembly of a single steel deck with a width of 0,32 m and transoms 73 – two such decks.

Transoms  are available in three structural variants:

– basic (models 42-U and 73-U and 39-O, 42-O, 73-O) – consisting of only an adequate supporting profile, terminated with heads with rigid lockers;

– reinforced –  in which directly under the supporting profile for deck assembly a special section is provided of stiffen the ledger structure;

– double – where beam allowing for the assembly of decks is reinforced with a structure consisting of a bent pipe and platens with holes.

Each variant is available with the supporting profile (for assembly of decks) in form of a special section – variant “U” or a pipe with an outer diameter of 48,3 mm – variant “O”.

Transoms 42 allows for the assembly of a single steel deck with a width of 0,32 m and transoms 73 – two such decks.

Transoms  are available in three structural variants:

– basic (models 42-U and 73-U and 39-O, 42-O, 73-O) – consisting of only an adequate supporting profile, terminated with heads with rigid lockers;

– reinforced –  in which directly under the supporting profile for deck assembly a special section is provided of stiffen the ledger structure;

– double – where beam allowing for the assembly of decks is reinforced with a structure consisting of a bent pipe and platens with holes.

Each variant is available with the supporting profile (for assembly of decks) in form of a special section – variant “U” or a pipe with an outer diameter of 48,3 mm – variant “O”.

Transoms 42 allows for the assembly of a single steel deck with a width of 0,32 m and transoms 73 – two such decks.

Reinforced transoms (models 109-UW, 140-UW, 109-OW and 140-UW) are suitable for transferring of larger loads and allow for assembly of either 3 (models 109) or 4 (models 140) steel decks with a width of 0,32 m.

In scaffolds, the deck  is one or more decking components on the same level within one bay, where the decking component is a prefabricated or otherwise manufactured component which independently transfer loads and  constitutes the deck or deck section.

Aluminium-plywood decks come in both circulation variety (with or without an integrated ladder) and working deck variety.

They comprise a welded aluminium frame (with heads on both ends with mounting holes matching the pins on the frames), reinforced by cross-bars and finished with anti-slip

plywood. In the case of circulation decks, there is an additional hatch and integrated aluminium ladder (only for 2.57 m and 3.07 m lengths).

The respective models (Standard and Heavy) differ by the type of alu section used for the deck frame ledgers and head structure.

In scaffolds, the deck  is one or more decking components on the same level within one bay, where the decking component is a prefabricated or otherwise manufactured component which independently transfer loads and  constitutes the deck or deck section.

Aluminium-plywood decks come in both circulation variety (with or without an integrated ladder) and working deck variety.

They comprise a welded aluminium frame (with heads on both ends with mounting holes matching the pins on the frames), reinforced by cross-bars and finished with anti-slip

plywood. In the case of circulation decks, there is an additional hatch and integrated aluminium ladder (only for 2.57 m and 3.07 m lengths).

The respective models (Standard and Heavy) differ by the type of alu section used for the deck frame ledgers and head structure.

In scaffolds, the deck  is one or more decking components on the same level within one bay, where the decking component is a prefabricated or otherwise manufactured component which independently transfer loads and  constitutes the deck or deck section.

Aluminium-plywood decks come in both circulation variety (with or without an integrated ladder) and working deck variety.

They comprise a welded aluminium frame (with heads on both ends with mounting holes matching the pins on the frames), reinforced by cross-bars and finished with anti-slip

plywood. In the case of circulation decks, there is an additional hatch and integrated aluminium ladder (only for 2.57 m and 3.07 m lengths).

The respective models (Standard and Heavy) differ by the type of alu section used for the deck frame ledgers and head structure.